Cisco ISR4431-DNA Router

DescriptionISR4431-DNA SpecificationProduct CodeISR4431-DNADescriptionCisco ISR 4431 (4GE,3NIM,8G FLASH,4G DRAM,IPB) with DNA subAggregate Throughput (Default)500 MbpsAggregate Throughput (Performance License)1 GbpsAggregate CEF Only Throughput (Boost License)Over 4 GbpsTotal onboard WAN or LAN 10/100/1000 ports4Total onboard WAN or LAN 10Gbps portsN/ARJ-45-based ports4SFP-based ports4Enhanced service-module slots0Doublewide service-module slots0NIM slots3OIR (all I/O modules)YesOnboard ISC slot1Default memory double-data-rate 3 (DDR3) error-correction-code (ECC) DRAM (Combined control/services/data planes)N/AMaximum memory DDR3 ECC DRAM (Combined control/services/data planes)N/ADefault memory DDR3 ECC DRAM (data plane)2 GBMaximum memory DDR3 ECC DRAM (data plane)2 GBDefault memory DDR3 ECC DRAM (control/services plane)4 GBMaximum memory DDR3 ECC DRAM (control/services plane)16 GBDefault flash memory8 GBMaximum flash memory32 GBExternal USB 2.0 slots (type A)1USB console port -type B mini (up to 115.2 kbps)2Serial console port – RJ45 (up to 115.2 kbps)1Serial auxiliary port – RJ45(up to 115.2 kbps)1Power-supply optionsInternal: AC, DC, and PoERedundant power supplyInternal: AC, DC, and PoEPower SpecificationsAC input voltage100 to 240 VAC autorangingDC Input VoltageInput VoltageInput Current 48–60 V12 A MaxAC input frequency47 to 63 HzAC input current range, AC power supply (maximum)3 to 1.3 A AC input surge current60 A peak and less than 5 Arms per half cycleTypical power (no modules) (watts)65Maximum power with AC power supply (watts)250 (no PoE)Maximum power with DC power supply (watts)437 (no PoE)Maximum power with PoE power supply (platform only) (watts)500 with PoE redundant1000 with PoE boost no redundancyMaximum endpoint PoE power available from PoE power supply (watts)250 W with optional redundancyMaximum endpoint PoE power capacity with PoE boost (watts)500 W no redundancyDimensions(H x W x D)1.73 x 17.25 x 19.97 in(43.9 x 438.15 x 507.2 mm)Rack height1 Rack Units (1RU)Rack-mount 19in. (48.3 cm) EIAIncludedIncludedOptionalWall-mountYesAirflowI/O side to bezel sideMTBF (Hours)512970Environmental SpecificationsTemperature32º to 104ºF(0 to 40ºC)Altitude(China)0–6,560 ft.(0–2,000 m)Altitude(Rest of the world)0–10,000 ft.(0–3,050 m)Short Term Temperature upto 6560ft per NEBS GR-63-COREN/ARelative humidity5% to 85%Short-term humidity5% to 90% not to exceed 0.024 kg water/kg of dry airAcoustics:Sound pressure(Typical/maximum)54.3/79.1 dBA57.2/80.8 dBA57.2/80.8 dBANonoperating ConditionsTemperature-40 to 158ºF(-40 to 70ºC)Relative humidity5% to 95%Altitude15,584 ft (4750m)Regulatory and ComplianceSafetyUL 60950-1CAN/CSAC22.2 No.60950-1EN 60950-1AS/NZS60950-1IEC 60950-1EMC47 CFR, Part 15ICES-003Class AEN55032Class ACISPR32Class AAS/NZS CISPR 32Class AVCCI V-3CNS 13438EN 300-386EN 61000 (Immunity)EN 55024, CISPR 24KN22, KN24Cisco IOS XE SoftwareProtocolsIPv4, IPv6, static routes, Routing Information Protocol Versions 1 and 2 (RIP and RIPv2), Open Shortest Path First (OSPF), Enhanced IGRP (EIGRP), Border Gateway Protocol (BGP), BGP Router Reflector, Intermediate System-to-Intermediate System (IS-IS), Multicast Internet Group Management Protocol Version 3 (IGMPv3), Protocol Independent Multicast sparse mode (PIM SM), PIM Source Specific Multicast (SSM), RSVP, CDP, ERSPAN, IPSLA, Call Home, EEM, IKE, ACL, EVC, DHCP, FR, DNS, LISP, OTV[6], HSRP, RADIUS, AAA, AVC, Distance Vector Multicast Routing Protocol (DVMRP), IPv4-to-IPv6 Multicast, MPLS, Layer 2 and Layer 3 VPN, IP sec, Layer 2 Tunneling Protocol Version 3 (L2TPv3), Bidirectional Forwarding Detection (BFD), IEEE802.1ag, and IEEE802.3ahEncapsulationsGeneric routing encapsulation (GRE), Ethernet, 802.1q VLAN, Point-to-Point Protocol (PPP), Multilink Point-to-Point Protocol (MLPPP), Frame Relay, Multilink Frame Relay (MLFR) (FR.15 and FR.16), High-Level Data Link Control (HDLC), Serial (RS-232, RS-449, X.21, V.35, and EIA-530), and PPP over Ethernet (PPPoE)Traffic managementQoS, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Random Early Detection (WRED), Hierarchical QoS, Policy-Based Routing (PBR), Performance Routing, and NBAR.Cryptographic AlgorithmsEncryption: DES, 3DES, AES-128 or AES-256 (in CBC and GCM modes); Authentication: RSA (748/1024/2048 bit), ECDSA (256/384 bit); Integrity: MD5, SHA, SHA-256, SHA-384, SHA-512TelecomTIA-968-B CS-03 ANSI T1.101 ITU-T G.823,G.824 IEEE 802.3 RTTE Directive Homologation requirement s vary by country and interface type.